HD-Series - High-Density Riser and LSZH IEC Rated Cables

Indoor Cables (Data Center and Assembly)

Installation zone RECOMMENDATION

Ideal for use in trunk, LAN, data center, 40/100GbE and other high-density applications where small size, lightweight, and very small bend radii are required
Inventory one cable type to cover the complete range of legacy ST, SC, FC, LC, and advanced MPO-style connectivity
Applications where tight bends and flexibility are needed
Space-saving applications where MTP can be directly terminated to the cable
Small diameter, which saves space and greatly increases capacity in tray systems, improves cable management and increases cooling power efficiency and cost for under raised floor cabling systems in data centers

Ideal for use in trunk, LAN, data center, 40/100GbE and other high-density applications where small size, lightweight, and very small bend radii are required
Inventory one cable type to cover the complete range of legacy ST, SC, FC, LC, and advanced MPO-style connectivity
Applications where tight bends and flexibility are needed
Space-saving applications where MTP can be directly terminated to the cable
Small diameter, which saves space and greatly increases capacity in tray systems, improves cable management and increases cooling power efficiency and cost for under raised floor cabling systems in data centers

Ideal for installation in areas with limited space or tight bends
Easily ribbonized for use with MPO-style connectors
8 and 12-fiber premises applications
UL Listed OFNR-ST1 in accordance with NEC section 770.179(b) for use in verticle runs in building risers or from floor to floor
Flame-retardant, low-smoke and zero-halogen to applicable IEC standards: 60332-3-24, 61034-2 ans 60754-2
Cable materials are UV and fungus resistant
Superior bend performance with negligible dB loss at very small bend radii

Characteristic	Riser
Operating Temp	0°C to +70°C
Storage Temp	-40°C to +70°C
Install Temp	0°C to +60°C (actual temperature of cable)
Flame Retardancy	UL listed type OFNR-ST1 (UL 1666 and 1685) and FT4 (CSA C22.2 No. 232)
Jacket Type	Z

OCC indoor high-density cables meet the functional requirement of the following standards:

					Tensile Load		Minimum Bend Radius
Fiber Count	Part Number	Part Number Configurator	Diameter mm (in)	Weight kg/km (lbs/1,000ft)	Installation N (lbs)	Operation N (lbs)	Installation cm (in)	Longer Term cm (in)
8		Please Call OCC for ordering assistance.	3.0 (0.12)	8.6 (6.0)	500 (110)	300 (70)	4.5 (1.8)	3.0 (1.2)
12		Please Call OCC for ordering assistance.	3.0 (0.12)	8.6 (6.0)	500 (110)	300 (70)	4.5 (1.8)	3.0 (1.2)